| |
Air Guard Terminal HEPA/ULPA Filter
Modules are lightweight unitized low profile disposable
ducted units with minipleat filter packs designed to
provide unidirectional airflow from tee-bar ceilings.
The
modules are available in two sizes: nominal 24" X24" and
24" X 48" with either nominal 10" or
12" diameter inlet collars, and available in two
particle size efficiencies: 99.9% on 0.30 µm
and 99.9995% on 0.12µm. Each module is scan tested
after assembly to meet or exceed IES RP-1 requirements
for a Type C or F filter. |
| |
| Important features: |
| |
 Scan-tested
after assembly to meet or exceed IES RP-1
 requirements
for Type C or F filters |
Minipleat
separatorless filter pack for a lightweight and low profile
design |
| In-room
air flow damper adjustment and challenge aerosol ports |
| One-piece
aluminum hood/inlet collar |
| |
| Air
Guard - Terminal Filter Modules |
| |
 |
|
Lightweight, unitized
low profile disposable ducted Ecoflo units are manufactured
with minipleat HEPA filter packs. The Ecoflo is designed
to provide unidirectional airflow patterns. Ecoflo
filter packs are sealed in an anodized extruded aluminum
casing. The one-piece hood/inlet collar is manufactured
of aluminum. Each unit is scan tested to meet IES
RP-1 requirements and is available in 99.99% and
99.9995% efficiencies. |
|
| |
------------------------------------------------------------------------- |
| |
| Air
Guard - FP - Fan Powered Terminal Filter Modules |
| |
 |
| |
A low profile self-powered HEPA fan
module, the Ecoflo-FP is designed to deliver unidirectional
laminar air flow. Furnished with a 1/3 horsepower integral
blower assembly which maintains the rated airflow as
the filter loading is increased.
Standard modules include a 115 volt, single phase, 60
HZ motor wired to a junction box and two speed switch.
Meets IES RP-2 Filter Classification and Federal Standard
209. Available in 99.99% and 99.9995% efficiencies. |
| |
| ------------------------------------------------------------------------- |
| |
| Previous - Next |
